Acrosser Network Platforms Use Intel Processor

Acrosser Technology has introduced its AR-R5100FL 1U 19in rack-mount fanless network platforms, which include an Intel EP80579 integrated processor with Intel Quickassist Technology. Intel EP80579, also known as Tolapai, is a powerful, integrated system-on-chip solution dedicated to networking appliances that require the encryption and decryption function. A built-in algorithm provides high performance with less CPU usage.

With Acrosser core technology the AR-R5100FL provides stability in noiseless formation and ensures a longer lifetime due to no moving parts. The platform offers two CPU frequency choices, 600MHz/1.2GHz and memory support up to single-channel 4GB DDR2. By leveraging the PCI Express technology and internal Giga LAN MAC it provides total of six GbE ports. Configurable bypass functions ensure continuous operation during power interruption. An optional module, AR-B2004-X4, provides two additional RJ-45 GbE ports and two GbE SFP ports in AR-R5100FL for maximising bandwidth.

AR-R5100FL offers a security-accelerating function and power efficiency that is suitable for internet-security applications such as VPN (Virtual Private Network), Firewall and Anti-Spam mail server. System integrators can develop applications with Intel Quickassist technology to maximise performance. AR-R5100FL features include: Intel integrated system-on-chip EP80579 with Intel Quickassist technology; memory slots support up to 4GB single-channel DDR2 with ECC function; RJ-45 Gigabit Ethernet option up to 8RJ-45 and 2SFP GbE; console-redirection port or two-pair bypass function controlled by hardware and software; and 16 x 2 characters LCD module.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more