Fluke Offers T5-600 Tester In Limited-Edition Kit

Fluke is offering a special kit consisting of either the Fluke 1653B or 1652B multifunction installation tester with a free Fluke T5-600 electrical tester for a limited period. The tester is worth GBP99, and the special part number for ordering the limited-edition kit is Fluke 1652B/T5 or 1653B/T5.

The 1650B series testers are designed to ensure that fixed wiring is safe and correctly installed to meet the latest BS7671 17th Edition. They have features that offer faster high-current loop testing, a variable RCD current mode for customised settings, a Pass/Fail indication for RCD tests, and voltage measurement selection between L-N, L-PE and N-PE without changing connections.

The Fluke 1652B is ideal for professional trouble-shooters working in both domestic and commercial. The Fluke 1653 is the complete tester: with phase-rotation test and in-built memory for documenting results, it is ideal for industrial applications. The Fluke T5-600 electrical tester measures voltage, current and resistance and tests continuity, all in a single slim and compact package.

With a 600V Category III safety rating, the OpenJawO technology body ensures easy and safe measurement of AC currents up to 100A without breaking the circuit. It measures voltages up to 600V AC/DC and resistance to 1000W. A sleep mode ensures battery conservation.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more