Japan's NPA Selects Thermo Fisher Spectrometers

Japan's National Police Agency (NPA) has purchased 51 Thermo Scientific LXQ linear ion trap mass spectrometers and 27 Thermo Scientific Nicolet 6700 FT-IR spectrometers with Continuum microscopes. The NPA will use the LXQ LC/MS/MS system for toxicology screening in each of its 47 prefecture offices and will use the Nicolet 6700 FT-IR system for forensics in nearly half of those offices.

Prior to purchasing the LXQ system, the NPA used single quadruple LCMS for analysing drugs and toxic substances. The LXQ's ion trap technology provides high sensitivity and specificity, which enables it to analyse hundreds of analytes in blood and urine samples. The NPA said that one of the reasons it chose the LXQ was the time and labour it saved with the total solution offered by Thermo Fisher Scientific, including the company's ToxID software.

The software performs automatic data analysis and reporting, eliminating the need for manual data interpretation and increasing confidence in compound identification. The NPA saw a similar opportunity to improve both the quality of its forensic analysis, as well as to optimise cost per analysis and lab productivity with the Nicolet 6700 FT-IR spectrometer and Continuum microscope. This system combines visual microscopic analysis with infrared chemical information, ensuring sensitive, accurate interpretation, while preserving the sample.

For instance, one reason the NPA cited for purchasing the Nicolet 6700 FT-IR was its ability to analyse paint chips, a key piece of identification evidence in a hit-and-run crime. Normally, identifying auto paint requires dissolution and chemical extraction, but FT-IR microscopy provides quick chemical identification of each paint layer without degrading the sample.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more