Inspire Oscillator Is Fully Automated

Newport Spectra Physics has introduced the Inspire optical parametric oscillator (OPO), a tunable, ultra-fast laser source for advanced imaging and spectroscopy applications. Optimised for use with the company's Mai Tai HP ultra-fast laser, the Inspire OPO delivers a wide, gap-free ultra-fast tuning range, from ultraviolet (UV) to infrared (245-2,500nm), and high power in the UV and visible.

Newport's OPO is fully automated for computer-controlled tuning across the range without adjustment or change of optics. The Inspire OPO has multiple output ports for simultaneous UV, visible and infrared output, making it ideal for applications that require multiple wavelengths, such as coherent anti-Stokes Raman scattering (CARS) imaging. The OPO delivers >1W of average power from 345-520nm and >400mW from 490-750nm.

Additionally, the Inspire OPO provides adjustable pulse widths (from 80-350fs). Optimised for high stability, the robust OPO is insensitive to ambient temperature change. Another addition to the product family is the Inspire Blue, an automated frequency doubler for Ti:Sapphire lasers. The Inspire Blue features high UV and blue conversion efficiency and automated tuning.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more