QTC Catalog Features More Than 16,000 Components

Quality Transmission Components (QTC) has announced the availability of its free Q470 catalogue. This 352-page catalogue contains more than 16,000 off-the-shelf standardised components for use in MRO, RandD and production applications. The catalogue has six chapters and provides specifications of the complete product offering of timing pulleys, timing belts, bushings, belt clamping kits, roller chain sprockets, roller chains, diametral pitch gears, belt and chain tensioners, sonic tension testers and planetary gearheads.

Chapter one details the company's offering of metric and inch bored timing pulleys made from carbon steel, nylon and aluminum in AT5, AT10, T2.5, T5, T10, HTD3, HTD5, HTD8, MXL, XL and L profiles. Chapter two contains details of fibreglass-reinforced neoprene timing belts in AT5, AT10, T2.5, T5, T10, HTD3, HTD5, HTD8, MXL, XL and L profiles, as well as belt clamping kits for GT2, GT3, GT5 and GT8 profiles and sonic tension testers. Chapter three shows more than 100 styles of timing belt, v-belt and roller chain tensioners.

Chapter four details an offering of metric and inch bored roller chain sprockets made from carbon steel to the ISO 04B ISO 05B, ISO 06B, ISO 08B and ISO 10B standard and the AISI standards 25, 35, 40, 41 and 50. This chapter also details corresponding roller chains and connecting links. Chapter five provides details on the company's diametral pitch spur gears, miter gears, bevel gears, gear racks and worm and worm wheels. Chapter six contains inline planetary gearheads in speed ratios of 3:1 through 81:1 in three different frame sizes and three different levels of backlash.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more