Dragon Runner Robot Supports Military Troops

Qinetiq has been awarded a contract to supply almost 100 Dragon Runner robots, associated spares and technical services to support of current military operations in Afghanistan. Dragon Runner is a small, rugged robot that weighs between 10-20kg depending on the chosen configuration. It can be carried by a soldier in a backpack and is robust enough to operate in rough terrain to help protect troops.

The variant selected by the UK Ministry of Defence (MoD) is equipped with a manipulator arm to assist with the disarming of improvised explosive devices, but the Dragon Runner platform can also be configured for a variety of other reconnaissance and surveillance operations. The robot is also able to operate in sewers, drainpipes, caves and courtyards. Already being deployed, the Dragon Runner has the ability to send video footage back to the operator at a safe distance, thereby enabling troops to assess a situation prior to moving forward or entering a structure, potentially safeguarding lives.

The robot is particularly suited to operational environments similar to those experienced in Afghanistan, where the road system has been ravaged by almost continuous fighting since the late 1970s and where many troop movements are conducted either on foot or by helicopter. The use of robots also has significant benefits in Afghanistan, where the United Nations estimates that 200,000 people have been disabled by landmines and other explosive remnants.

Qinetiq's initial contract with the UK MoD includes the supply of replacement parts and the provision of support throughout the operational life of the systems. This is an essential part of a UK-based maintenance and support plan that has been carefully designed to enable the UK MoD to return battle-damaged robots to active duty as quickly as possible. Dragon Runner was originally developed by Automatika, a US company acquired by Qinetiq North America.

The robot has since has been further developed as a result of UK and US military user input and it can travel at speeds of around 5mph, travel over rough terrain, as well as climb stairs and open doors. The basic chassis is 20cm wide, 7.5cm tall and 23cm in length and can be easily adapted in the field with various accessories and a manipulator arm to be mission specific. In addition to IED identification and defeat, other functions include perimeter security, checkpoint security and the inspection of suspect vehicles.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more