Latest Semrock Catalogue Features Four New Ranges


Semrock has published a 76-page, full-colour 2009-2010 master catalogue of optical filters and related products. It contains technical and product notes along with four new product ranges and many new filter products optimised for fluorescence, Raman spectroscopy and other laser analytical instrumentation applications. The new product ranges include the Image Splitting Dichroic Beamsplitters, which offer superb image quality for transmitted and reflected light due to a high degree of flatness.

They feature wide transmission and reflection bands (from 350 to 950nm for every filter). New Brightline multi-laser fluorescence filter sets are designed for advanced microscopy systems (including TIRF and confocal microscopes) and are available for the most popular laser combinations including 488/561nm (ideal for live-cell imaging with GFP/mCherry, for example) and 405/488/561/635nm wavelengths. This edition also features the debut of a range of filters for controlling the polarisation of light.

New Polarizing Bandpass Filters combine an efficient polariser with a bandpass filter into a single high-performance filter. They are available for 405, 532 and 640nm laser wavelength ranges. New near-infrared (NIR) bandpass filters are keyed to popular laser lines in the 1500-1600nm region.

The catalogue also features new products that enhance Semrock's 'no burn-out' Brightline fluorescence filters and sets, including new multiband filter sets, multiphoton fluorescence filters and dozens of bandpass filters and dichroic beamsplitters. Semrock services highlighted in the catalogue include Semrock's same-day shipping policy, rapid custom-sizing in less than one week, and a 30-day no-hassle return policy. All Semrock filters are covered under the company's five-year warranty.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more