Axiomtek Releases 3.5in Intel Atom Embedded Board

Axiomtek has launched a powerful 3.5in (8.9cm) Intel Atom embedded board, expanding its Atom embedded solution. The SBC84832 embedded SBC uses the Intel Atom N270 processor combined with the Intel 945GSE chipset and ICH7M Southbridge, which offers optimised power and a robust performance per watt for cost-effective embedded solutions. The onboard 1.60GHz Intel Atom N270 processor is claimed to provide good performance with low power consumption and fanless operation. The Mobile Intel 945GSE Express chipset comes with the Generation 3.5 Intel Integrated Graphics Engine and the Intel GMA 950, which provides enhanced graphics support over the previous-generation graphics and memory controller hubs. Moreover, the SBC84832 supports CRT (2,048 x 1,536) and LVDS LCD (1,600 x 1,200) dual-view displays and delivers flexible high-bandwidth expansion capability with one PCI Express mini card for custom system configurations. The small-footprint embedded board provides a solution for digital signage, kiosks, point of sale (POS), thin clients, digital security and industrial control. One DDR2 SODIMM on board implements up to 2Gb of system memory. The SBC84832 platform comes with advanced connectivity and expansion interfaces, including two powered COM ports (RS-232), six high-speed USB 2.0 ports, dual-gigabit local-area-network (LAN) ports, one Compactflash Type-II socket, a PS/2 keyboard and mouse, AC'97 Codec audio, two SATA-150 ports and digital input/output (I/O). Two highly integrated Realtek RTL8111B 10/100/1000 Ethernet controllers feature remote wake-up functions to increase cost efficiency in network maintenance and management. A watchdog timer is included to keep the system running smoothly. Joseph Chou, product manager of the company's Embedded Computing business unit, said: 'Axiomtek has expanded its range of single-board computers with the launch of several new embedded boards based on the energy-efficient Intel Atom processors. 'Axiomtek's SBC84832 is a small-footprint single-board computer that is configured with the Intel Atom N270 processor at 1.60GHz, FSB 533MHz and the Mobile Intel 945GSE Express chipset with the ICH7M,' he added. The SBC84832 is RoHS compliant and is available now.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more