IBase Offers IB945 CPU Card For High-End Platforms

IBase Technology, a manufacturer of industrial motherboards, has introduced the IB945 PICMG 1.0 full-size CPU card. It uses the latest Intel Q45 Express chipset, which supports Intel Core2 Quad processors to deliver energy-efficient performance across a variety of high-end platforms. With support for the new dual-channel DDR3 memory technology at 1,066MHz, it offers a higher bandwidth and better performance than DDR2, while operating at a lower memory voltage for lower DIMM power consumption.

With the Intel Graphics Media Accelerator 4500 and Chrontel CH7307C controller device, IB945 is claimed to provide good graphics performance with interfaces for a VGA CRT and a DVI display. It has six SATA ports to provide a faster transfer rate for improved data access and six USB ports that allow connection to various peripherals and computing devices. Other features of the IB945 include two gigabit local-area networks (LANs), two COM ports, IDE and parallel ports, ISA high drive, digital input/output (I/O), a watchdog and a Mini PCI Express socket for added expansion. Dimensions are 338mm x 122mm. Samples of the IBase IB945 PICMG 1.0 full-size CPU card are available now.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more