Skkynet Teams with Red Lion Controls to Expand Secure IIoT Services

Skkynet Cloud Systems, Inc. (“Skkynet” or “the Company”) (OTCQB: SKKY), a global leader in real-time cloud information systems, announces a new collaboration with Red Lion Controls that provides industrial automation engineers and managers with highly secure, real—time communication that seamlessly integrates with the Industrial Internet of Things (IIoT). The collaboration employs Skkynet’s Embedded Toolkit (ETK) in combination with Red Lion’s Sixnet® series IndustrialPro® cellular routers and Data Station Plus protocol converters. Together, the system supports over 300 industrial protocols to link devices to Skkynet’s SkkyHub™ for secure, bidirectional, real-time communication.

“There are a number of major hurdles to becoming IIoT-ready, most importantly security and multi-protocol communication.” said Paul Thomas, President of Skkynet. “A primary objective of this collaboration was to integrate our ETK on Red Lion’s IndustrialPro cellular routers, thereby providing secure connectivity to SkkyHub, with no open firewall ports, VPN or programming required. The end result is secure, real-time monitoring, control, networking, and big data collection at a far lower total cost of ownership (TCO).”

“Becoming IIoT-ready can be a daunting task for many organizations with legacy devices that do not speak the same language.” said Brian Rosema, director of IIoT strategy for Red Lion Controls. “With support for more than 300 industrial protocols, our Data Station Plus protocol converters and rugged cellular routers work in tandem with SkkyHub to connect devices, thereby improving process visibility and pushing control to the edge. The result is a robust, fully integrated IIoT solution that connects virtually any device to any other device or user.”

Skkynet’s SkkyHub service provides secure, end-to-end bidirectional connectivity between the Sixnet IndustrialPro series routers and end users at all levels, from operators and plant engineers to managers, analysts, and customers. The service is capable of handling over 50.000 data changes per second per client, at speeds just a few milliseconds over Internet latency. Secure by design, it requires no VPN, no open firewall ports, no special programming, and no additional hardware.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more