OMRON to Release Redesigned E5GN, Smallest Member of Bestselling E5_N Series of Temperature Controllers


Tokyo, Japan – OMRON Corporation (TOKYO: 6645, ADR: OMRNY) today launched the redesigned E5GN temperature controller, the smallest controller (DIN 48 x 24 mm) in the bestselling E5_N series of temperature controllers, to global markets.

Since the E5_N series was first introduced in 1998, the line-up has retained its fundamental strengths, while product features have evolved in response to the needs of our onsite customers. The series has achieved worldwide sales of three million units to date.

The E5_N series was developed around the concept of "onsite simplicity." It features easy model selection, operation and maintenance, which are crucial to achieving smooth onsite operations.

The E5GN features a display that reliably notifies the operator of current conditions, various functions that reduce the time required for settings and adjustments, reliable designs that reduce maintenance, and various services all aimed at ensuring simplicity in temperature control for all production sites.

The E5_N series comprises two functional variations: basic models that provide excellent cost/performance and general applicability, and advanced models for applications that require superior performance and functionality.

The E5GN released today is a basic model. Adopting the "onsite simplicity" concept of the series, its compact size of DIN 48 x 24 mm allows for flexibility in installation locations.

With the addition of the compact G size (DIN 48 x 24 mm), the E5—N series now provides a selection of four sizes, also including the A size (DIN 96 x 96 mm), E size (DIN 48 x 96 mm) and C size (DIN 48 x 48 mm), allowing customers to select the best model for the application site.

Comments

Post a Comment

Popular posts from this blog

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

How LVDT Pressure Sensors Work?

Image
Pressure sensors - commonly referred to as pressure transducers, pressure transmitters, pressure indicators or pressure switches - are used to measure the pressure of gases and liquids (fluids). Pressure is an expression of the force and is normally stated in terms of force per unit area. A pressure sensor will generate an electrical signal relating to the pressure imposed. This signal is either analogue or digital in more modern designs, although optical, visual and auditory signals are also common. Industrial pressure transducers normally have a diaphragm type design that uses strain gauges, which are either bonded to, or diffused into it, with the strain gauges acting as resistive elements. Under the pressure-induced strain, the resistive values change. In capacitive technology, the pressure diaphragm is a single plate of a capacitor that
Read more

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more