Aaeon Motherboard Uses Intel Chipset

Aaeon has released the EMB-9658T embedded motherboard, which adopts the Intel GME965 + ICH8M chipset. The EMB-9658T is an advanced embedded motherboard that features PCI-Express and IAMT2.5. It comes with an Intel Core 2 Duo/Celeron M (socket-P based) processor based on the Intel GME965 + ICH8M chipset (the ICH8ME is optional for RAID support) for a high-performance computing platform.

This model supports two 200-pin DDRII SODIMM modules with support for a total of 4GB maximum at a speed of 533/667. The EMB-9658T equips Intel 82566MM and Intel 82573L chipsets for two 10/100/1000Base-TX Ethernet RJ-45 connectors. For the expansion interfaces, one PCI, one Mini PCI and one PCI-Express x4 through a riser card are available. The EMB-9658T supports LCD/CRT, LCD/DVI, LCD/TV, CRT/DVI, TV/DVI, simultaneous/dual-view displays with LCD and CRT resolution support of up to 2,048 x 1,536 to meet abundant interface requirements.

It features up to 24-bit dual-channel LVDS, one DVI-I and SDVO. Display memory is shared by the system memory for up to 384MB/DVMT 4.0. The Intel GME965 integrates TV-out function that supports NTSC/ PAL/ HDTV: 480p/720p/1080i/1080p. The EMB-9658T also deploys the high-definition 5.1CH audio interface in order to complete its multimedia capabilities. All of the integrated features of the EMB-9658T target the digital signage, automation, gaming and medical markets.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more