Posts

Showing posts with the label Monitor

Linear Supply Monitor Has Power Glitch Immunity

Image
Linear Technology has introduced the LTC2939, a six-channel supply monitor with processor supervisory functions that can be configured for low-voltage applications down to 1.2V. One of 16 preset or adjustable voltage threshold combinations can be selected, all of which maintain an accuracy of +/- 1.5 per cent from -40C to +125C. These preset set points are selected via an external resistive pair on a single pin, while the actual thresholds are set by integrated precision dividers for 5V, 3.3V, 2.5V and 1.5V supply monitoring. Built-in power supply glitch immunity allows the LTC2939 to practically eliminate false detections, while only using 80uA of supply current. Set points, reset timeout period and watchdog timeout period are all at the discretion of the designer when using the LTC2939 to monitor multiple positive and negative power rails. The LTC2939 is suitable for large systems where board space is at a premium and a single supervisor is needed. Often times, multiple supervisor ...

Sensepoint XCD Detectors Monitor Gas Hazards

The Sensepoint XCD range of detectors from Honeywell monitors flammable, toxic and oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces routine maintenance times and costs. A tri-colour backlit LCD indicates the unit's status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm. All detectors are supplied pre-configured and include two programmable alarm relays, one programmable fault relay and an industry-standard 4-20mA output (sink or source selectable) and Modbus. The scale, range, relay operation, alarm set point and electronic tag number of the detector can be adjusted using the transmitter's LCD and non-intrusive magnetic switches. Outputs are automatically inhibited duri...

Axiomtek Unveils Medical-Grade Touch LCD Monitor

Axiomtek has introduced a 22in (56cm) TFT medical-grade touch LCD monitor. The MMT225, which is especially designed for the medical environment, adopts an IPX1 waterproof design that protects the system from outside liquid, preventing the system from crashing. The fanless unit is 69mm thick and is outfitted with 22in TFT 300 nits, a WSXGA LCD display and an OSD to facilitate viewing quality and data entry. The MMT225 is suitable for medical image processing and mobile nursing carts. It complies with UL60601-1/EN60601-1, CE and FCC Class B certifications. The MMT225 offers excellent fanless operation and a long lifecycle under any severe condition, according to the company. To protect the unit from outside damage, the MMT225 adopts IP65 front-panel and IPX1 system spill-/dust-proof designs. By supporting a lock-type medical adaptor plug, this slim medical-grade monitor is suitable for a variety of harsh environments. The high-brightness display also incorporates the multi-signal input...

Power Supply Monitor Manages DC/DC Converters

Image
Linear Technology has introduced the LTC2978 power supply monitor and controller for digital management of up to eight 0-6V power supplies. Configuring multiple DC/DC converters in an already complex system can be a complicated design task when using passive components. Values defined by external trim resistors and capacitors such as start-up time, set point value or switching frequency make a system inflexible. To alleviate these issues, digital control over analogue power suppliers has allowed for quick adjustment of output voltages and precise protection, monitoring and diagnostic mechanisms. The LTC2978's PMBus-compliant interface provides easy access to an on-board EEPROM, giving users supply configuration, fault response and logging capabilities. In addition, an array of supervising, margining and sequencing functions make the LTC2978 an all-in-one digital power management solution, simplifying the design challenges and reducing the component count typical of traditional ana...

Fleet Monitor Tracks Excessive Speed And Idling

Image
Mentor Engineering has introduced a fleet monitoring service that tracks excessive speed and idling to reduce fuel costs, minimise accident liability risks and improve driver habits. The Mentor Fleet Monitor is a comprehensive service that provides enhanced vehicle monitoring capabilities. Vehicles that speed or idle unnecessarily can drive up operating costs. A US Environmental Protection Agency study reported that trucks left idling for long periods of time waste approximately 960 million gallons of diesel fuel each year. According to the US Department of Transportation, an average truck burns 0.9 gallons of fuel per hour idling. By tracking and controlling driver speed behaviour, a company can reduce accidents, according to Mentor. When a speed or idling event occurs, data is sent from the in-vehicle mobile computer to a server, hosted by Mentor, where speed and idling reports are created for the client. Using this information, clients can identify at-risk drivers and develop train...

Insertion Probes Monitor Bioproduction Process

Image
Stratophase has collaborated with the Centre for Process Innovation (CPI) to develop an insertion probe variant of its Spectrosens system. Enabling real-time monitoring of the bioproduction fermentation process, the multi-output Spectrosens insertion probes track compositional changes and monitor temperature in the liquid. Multiple discrete readings can be taken simultaneously at numerous locations, providing more reliable measurements and a reduced chance of false positives. As a result, the entire fermentation process can be precisely monitored to ensure reproducibility and clear determination of the desired end-point. The Spectrosens system sensors can be placed throughout the production process and networked via the control and analysis unit. Using only light at the point of measurement, the sensors are intrinsically safe and spark free, removing any chances of ignition. The insertion probe fits standard ports for dissolved oxygen (DO) and pH probes, enabling ultra-high resolution...

Thin Film-Based Gauges Monitor Local Environments

Image
Reynard , a supplier of optical components and custom thin-film coatings, has introduced thin film-based environmental gauges. Thin film-based environmental gauges are manufactured by depositing environmentally susceptible coating materials onto an inert substrate. Coating materials are typically deposited in a custom-defined quasi-grid pattern of lines. Redundant traces, matched in length and size, can be implemented to monitor environmental changes over a small region, such as for rising gas or fluid conditions, or to provide damage protection when used in abrasive conditions. Unmatched lines allow for the variable open-space monitoring of growing corrosion levels, or for the monitoring of different types of corrosive elements. Grid configurations are designed for specific operational environments and can utilise a combination of matched and unmatched lines to achieve the required electrical characteristics. The detection of environmental-caused degradation is accomplished by monitor...

AL-3 Monitor Optimises Analogue Signalling Devices

Image
IFM Electronic has introduced the AL-3 monitor, which complements analogue signalling devices by allowing the user to set switchpoints and compare or combine values and scaling ranges. The AL-3 monitor is a programmable, two-channel analogue threshold relay with two inputs for analogue standard signals (0/4...20 mA). It picks up the current signals on separate inputs, compares them with the set limit values and switches the outputs according to the set switching functions. The input signals can be scaled to the measuring range of the sensor or transmitter so the measured values are indicated on the front display corresponding to their physical unit. The AL-3 features an output relay with changeover contact and a transistor output for each channel. The user can monitor values that exceed or fall below the limit values and window function. In the comparator operating mode, a differential pressure can, for example, be determined from the two input signals, monitored and provided as an an...

Tyre Pressure Monitor Has All Wheels Covered

System includes precision aerospace pressure sensors, transmitters, receiver and all necessary mounting equipment in a carrying case. The Techmor TP-1 allows accurate measurement of tyre pressures while on the track or the road Outputting at 4Hz, the TP-1 provides a smooth datastream that makes subtle pressure variations on track visible. A transmitter mounted to each hub sends wireless messages to a single receiver mounted inside the car. The pass-through titanium valve-stem sensor allows pressures to be checked and adjusted without removing hardware. Systems can be quickly installed on any standard Nascar hub and switched between wheel sets and cars with no extra equipment. Outputs are available in analogue, RS232 or CANbus. The system includes precision aerospace pressure sensors, transmitters, receiver and all necessary mounting equipment in a carrying case.

Monitor Keeps Watch Over Chain Systems

Renold has launched a new version of Smartlink, the innovative chain monitoring technology that can be installed and operated either by maintenance engineers or OEMs. Previous versions of Smartlink have had to be installed and monitored by Renold's own engineers limiting its use to larger projects. Now Smartlink can be owned and operated by anyone, bringing the benefits of chain monitoring to a much wider range of applications. The new Smartlink devices are supplied already fitted to a section of chain; users simply install the new chain link and Smartlink is ready to go. The new Smarlink units are available for operation on 1, 1.25 and 1.5in pitch chains. They are remotely controlled with a choice of two handheld devices, providing users with two levels of sophistication. The simpler of the two handheld controllers is no bigger than a keyfob and enables Smartlink to be operated as an overload detector. In this instance Smartlink will provide a warning when chain exceeds a pred...

Flowmeters Monitor Waste Water

The Wells Sanitary District waste water treatment facility has installed four Optiflux electromagnetic flowmeters to monitor the flow of sludge at the treatment plant. The newly refurbished plant on the southern coast of Maine, USA treats up to 7.5 million litres of waste water per day. Engineering consultants redesigned many of the systems and processes at the facility and replaced all the existing electromagnetic flowmeters with Krohne's Optiflux instruments. The Optiflux incorporates advanced measurement technology, which is highly accurate even when measuring substances with a high bubble or solid content or where there is turbulent flow. The flowmeters installed at Wells Sanitary District are being used to measure sludge recirculation and monitor the amount of effluent that is treated. In the sludge recirculation area, which forms part of the of the facility's in-line waste activated sludge process, two Optiflux flowmeters are being used to measure the throughput of sl...