Ring Sensors are Available in 3 Different Styles

TURCK Inc. introduces a new expanded line of ring sensors with higher sensitivity, new mounting features, accessories, housing styles and CE approval. The Q style (rectangular) family has grown with the addition of the Q80 (114x80x40 mm) housing. The Q80 style is available with a 50 or 65 mm ring diameter. Just like the smaller ring style sensors, the Q80 is equipped with a static output.

Innovative enhancements to the existing ring sensors provide even more sensing solutions from TURCK. Specifically, the S32 (175x100x32 mm) large ring sensors have been technically improved and now provide excellent adjustable sensitivity. Its modular construction enables both combined and remote installation of the ring and amplifier. With these recent improvements, this sensor now meets CE requirements. Based on modifications to the W30 (70x35x30 mm) mid-size ring sensor, TURCK now offers the W30S housing with enhancements to the existing design. The quick disconnect can be mounted on top of the housing instead of the side. This enhancement allows the cable to be directly parallel to a tube carrying the sensing target. Accessories for mounting the ring sensor directly onto a pipe or tube are also offered from TURCK .

The Q style ring sensors and accessories are space saving and easy to mount. With the additional styles and enhancements to the existing ring sensors, TURCK is able to meet all kinds of application requirements and continue to offer the broadest sensing product line in the industry.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more