Adept Presents Quattro S650H Robot

Adept Technology will be demonstrating the Adept Quattro S650H robot for solar manufacturing at the Taiwan International Photovoltaic Forum and Exhibition in Taipei, from 7-9 October. The technology will be shown in a solar wafer handling system, designed by the company's partner Castec International, on booth 1359. Castec will be demonstrating the high-speed system using the Quattro S650H robot with integrated vision guidance and inspection.

'Castec's turnkey automation solutions, incorporating Adept's robotics and control products, are designed to increase throughput, minimise breakage and reduce scrap,' said Rush LaSelle, director of global sales and marketing. The demonstration system will feature the Adept Quattro robot, which is a parallel robot (or 'delta robot') that features a four-arm rotational platform designed for maximum speed and maximum acceleration across the entire work envelope.

The embedded amplifiers and compact controls in the Adept Quattro parallel robot make installation easy and enable reduced workspace. Adeptsight is a stand-alone vision guidance and inspection package that runs on a PC and comes complete with all the necessary hardware and accessories.

The software includes a powerful framework that can be used to develop customised vision guidance and inspection applications. Its graphical interface is said to allow the user to develop robust and accurate vision applications. The Taiwan International Photovoltaic Forum and Exhibition will be held from 7-9 October 2009 at the Taipei World Trade Center Exhibition Hall, Area A.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more