Cables Handle Domestic And Industrial Jobs

YY, SY and CY flexible control cables are used as an interconnecting cable for measuring, controlling or regulation in control equipment for assembly and production lines. Anixter Components has added six new ranges of domestic mains and flexible control cables to its 2008/2009 product catalogue The range of mains cable includes industry standards such as 2192Y, 218Y and 318Y.

The 2192Y range is available in 0.5 and 0.75mm2 conductor sizes and the 218Y and 318Y are available from 0.5mm2 to 2.5mm2. These provide power for many domestic appliances including lightweight portable appliances, such as radios and table lamps, as well as those supporting heavier loads such as washing machines, spin dryers and refrigerators. For industrial applications, there is a range of YY, SY and CY flexible control cables.

These are used as an interconnecting cable for measuring, controlling or regulation in control equipment for assembly and production lines. The durable galvanised steel braiding on the SY types offers extra armouring for demanding applications such as machine tools, control gear and industrial conveyor installations.

Additionally, the CY types are enhanced by a copper screening, ensuring their suitability for installations where signal interference is a consideration. "It has always been our goal to offer our customers a one-stop-shop service for cable management products". said Andrew Fletcher, Technical Director, Anixter Components. "The introduction of wire and cable to our range is simply a natural progression".

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more