Gearbox Range Extended

Following last year's distribution agreement with Chiaravalli Trasmissioni, Transdev is now able to offer form-fit equivalents of Motorvario and Bonfiglioli worm gearboxes and geared motors at competitive prices. The CHM (Motorvario) and CHB (Bonfiglioli) series provide industry standard interchangeability covering a comprehensive range of aluminium and cast iron CNC machined housings with RAL 9022 powder coated epoxy protective finish.

With power ratings from 90W to 7.5kW, they are available in a wide choice of foot, flange and face mounting options with selectable motor position, single or double shafts, connection flanges for multiple mounting and a range of accessories including pre-stage gear reducers and torque arms.

The CHM range covers nine models with ratios from 7.5:1 to 100:1 and single or double solid input shafts on 25 to 130mm centre distances.

Nominal torque ratings are up to 14nm for the smallest frame model unit and are up to 650nm for the largest.

The CHB range covers four models with ratios from 7:1 to 100:1 with centre distances from 30 to 62.17mm with torque ratings to 110nm.

The modular design of both CHM and CHB versions includes standard B5 and B14 flanges with mounting surfaces on all faces allowing a wide choice of flange and foot mounting positions.

Specifications, installation and operational instructions are detailed in separate catalogues, available in hard copy or as a PDF on Transdev's website.

For use with the gearboxes, Transdev also supply a range of four-pole, three-phase motors with continuous service ratings to IEC 34-1, closed design IP55 housings and Eff2 efficiency levels.

With both B5 and B14 flanges and IEC power ratings to 7.5kW, accessories include forced ventilation kits.

Two-pole and six-pole windings and higher efficiency versions are also available.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more