SolaHD IP67 Rated Power Supplies Eliminate Need for Enclosures in Extreme Industrial Environments

With the increasing demand for machine device control and communication over industrial Ethernet, DeviceNet, and other networks, OEMs have found that installing traditional power supplies in distributed and remote locations has become prohibitively complex and costly because of the need for protective enclosures, fans, and excess wiring. In addition, enclosures introduce another potential point of failure into the production line.

To reduce cost and complications, SolaHD has launched its new IP67 SCP-X self-sealed power supplies. They mount directly on machines or as freestanding components on a production line, removing the constraints imposed by power supplies that must be housed in enclosures. Compared to power supplies housed in a separate enclosure, the IP67 SCP-X reduces total cost of ownership by as much as 54 percent.

Because the IP67 SCP-X is available in 100 watt and dual 100 watt models, it has the versatility to power from one to four loads. The 100 watt model has a single output of 3.8A at 24Vdc to deliver cost-efficient field power in a compact unit that requires minimal assembly. Dual 100 watt models have quad output of 7.6A at 24Vdc (3.8A max per pair). It eliminates need for splitters or additional wiring to power up to four loads, making it perfect for high density power requirements such as large conveyor belts or automative assembly lines.

Extreme environments found in industrial locations will compromise the performance of a standard power supply. This is why SolaHD took every measure possible to make the IP67 SCP-X the most robust industrial-grade power supply on the market today. This extends from its shock-absorbing, self-sealed IP67 rated enclosure impervious to water, dust and corrosion, to an optimized thermal management layout that prevents overheating while doing away with bulky external fans or forced air. It will operate reliably in ambient temperatures of -40°C to 60°C for the single watt model and -20°C to 60°C for the dual watt. In addition, it keeps signal noise and electromagnetic interference (EMI) well below the limits required to ensure reliable data communications.

Design engineers will welcome the IP67 SCP-X's ability to be directly mounted on a machine. In addition to not requiring an enclosure or a fan, it minimizes cabling to power devices while offering the flexibility to mount in any orientation with no derating. Quick change connectors simplify connectivity for distributed I/O devices, as well as assembly/disassembly. Its compact footprint of 4.7" x 7" compares favorably to a traditional power supply enclosure measuring 16" x 14".

New SolaHD IP67 SCP-X power supplies are immediately available. Both 100 watt and dual 100 watt models are backed by a five year limited warranty, the longest in the industry. All models are certified to meet Class 2 requirements for power limiting.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more