High-Speed Camera Captures Crisp Images

Dalsa has released the Falcon 1.4M100 1.4 megapixel, high-speed camera from Firstsight Vision. The new camera delivers 100 frames a second at full 1400 x 1024 pixel resolution. Even faster frame rates can be achieved through vertical windowing. The dynamic range of 57dB ensures excellent image quality.

Housed in a compact body, the new camera is ideally suited to applications in electronics manufacturing and semiconductor inspection. These include wire and die bonding, flat panel display inspection and pick and place. The high-speed capabilities also make it suitable for use in industrial metrology and general machine vision applications such as print registration and pharmaceutical inspection. The sensor provides global shuttering, global reset and concurrent integration and readout.

True global shuttering is suited to imaging fast-moving objects. It captures crisp images without smear or distortion by electronically shuttering all pixels simultaneously, even at short exposure times. This avoids the distortion of images of moving objects using rolling shutter systems.
Fully programmable via base mini Camera Link (CL), the camera incorporates exposure control, gain and offset adjustment and flat- field correction. The mini Camera Link interface allows data transmission over 10m cable lengths.

Ease of use is enhanced through direct camera control using Dalsa's CamExpert point-and-click graphical user interface. The Falcon 1.4M100 is fully compatible with Dalsa's Xcelera PoCL (Power over Camera Link) series of frame grabbers, as well as Dalsa's X64-CL and Anaconda CL vision processors.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more