Guide Helps Users Cut Compressed Air Costs

EnergAir has released a free guide to reducing costs in compressed air systems. Challenge Convention in Compressed Air details several ways to improve the energy efficiency of compressed air systems. Aimed at plant managers, site maintenance managers and energy managers the intention is to help address preconceived ideas about compressed air generation (one of the major energy costs to industry) that are currently the cause of huge amounts of energy waste, the alternatives can add literally tens of thousands on the bottom line.

'The industry needs to challenge convention on compressed air in order to realise the savings that can be made', according to Peter Tomlins of EnergAir UK. EnergAir believes that it can provide vital knowledge regarding the purchasing and integration of variable speed compressors, compressor sizing, balancing system pressure, providing visibility of actual energy consumption, and monitoring saving when changes are made, information that would not normally be available to individual plant and maintenance managers.

The brochure also contains real examples of how savings have been made by leading UK manufacturers such as Britvic and the equipment used to achieve those savings. The guide also aims to dispel some myths about how much difference new equipment can make without being properly integrated and offers advice on how to get the best from an existing compressor installation. The EnergAir guide to reducing the running costs of compressed air systems is available in paper format free from EnergAir and as a high-resolution pdf from the company website.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more