Lenze Three-Phase Electric AC Motors

Lenze's Robust Three-Phase Asynchronous Motor with integrated motec frequency inverter can be conveniently matched to the required machine or process parameters. The compact motor, which features a high degree of protection, can be networked via a fieldbus and the digital and analog I/Os used for open-loop or closed-loop control.As a result, it offers a wider range of potential applications. Lenze takes care of the cabling for you by installing the inverter at the Lenze factory. The decentralised concept minimises the need for shielded cables and saves your money. Many applications of Lenze three-phase AC motors require extra terminals in addition to the power connections of the motor, e.g. for the separate fan, thermal contacts, brake, etc.

The universal terminal box of Lenze three-phase AC motors offers a very convenient solution without intricate lamp-wire connectors. The terminal box has been expanded to include a small mounting rail. Up to 18 terminals can be connected to this rail, and all applications are thus possible. In addition, it is possible to include the rectifier required by the brake. Lenze three-phase AC motors are robust and applicable to many industry sectors.

The compact design and universality make these motors suitable for most applications. Lenze three-phase AC motors are distinguished by their modular design, which includes a universal terminal box, the easy installation of incremental encoders and resolvers. It is also possible to attach BFK458 spring-operated brakes for various applications. This Lenze AC motor program is rounded off by matching frequency inverters and attachable gearboxes.

Lenze asynchronous motors of the series 13.710 are compact and space-saving. Available in a power range from 12 to 90 W, these Lenze three-phase AC motors are naturally ventilated. Since they do not have a fan they have low noise emissions and can be applied in production areas with fluff or dust. The motors are available with solid shaft and keyway, with flange mounting and can be fitted with a brake.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more