Microchip Offers Miniature Microcontroller Package

Microchip has added a new member to its eight- and 14-pin PIC16F61X 8-bit PIC microcontroller (MCU) range, targeting cost-effective general-purpose applications. The PIC12F617 MCU features 3.5Kbyte of self-programmable Flash program memory (with a self-read-write capability) and peripherals such as a 10-bit analogue-to-digital converter (ADC), a comparator, a pulse-width modulator (PWM) and a VREF for closed-loop-control applications - all in a miniature 3 x 3mm DFN package.

The Flash programmable memory with a self-read-write capability serves as a low-cost alternative to data EEPROM and is useful when an application requires remote updates or the ability to store system data or look-up tables. The MCU features an 8MHz internal oscillator, an on-chip four-channel 10-bit ADC, a comparator with hysteresis and a PWM with complementary outputs that provide a framework for applications such as light-emitting-diode control, motor control, capacitive touch keys and system monitors.

Microchip has also announced a price reduction on the rest of the PIC16F61X members, including the PIC12F609, PIC12F615, PIC16F610 and PIC16F616 MCUs and their corresponding high-voltage variants. Microchip's complete suite of standard development tools can be used with the PIC12F617 MCU, including the free MPLAB IDE, along with the Hi-Tech C compiler for PIC12 MCUs.

The Hi-Tech Lite edition is a free, fully functional compiler with no time limitations. The MPLAB ICD eight- and 14-pin debugging header (part number AC162083, priced at USD35 or GBP22) is required for debugging the PIC16F616 and PIC12F617 devices.

Comments

Post a Comment

Popular posts from this blog

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more