U97-Ultra UTP Console Extender Has 500ft Range

Hall Research has released the U97-Ultra, an all-in-one UTP console extender. It is used to send dual-screen video, stereo audio, RS-232 and up to three independent USB ports from a PC to a remote location 500ft (152.4m) away over standard CATx twisted-pair cables. Local outputs for the A/V signals and USB ports are provided on the sender so that the system can be accessed automatically from two locations.

The remote receiver unit provides digitally controlled high-frequency compensation and RGB skew correction for both video heads. It features line-level and amplified audio outputs for directly driving passive speakers. The U97-Ultra includes built-in video test-pattern generator, which enables the user to precisely adjust and verify the video alignment without any external test equipment or video sources.

Other features include EDID (Extended Display ID) support, internal power supplies and up to three separate and independent USB extensions. One of the USB channels provides a two-port hub at the sender and a four-port hub at the receiver, while the others are direct extensions completely transparent to the PC. Having more than one USB connection to the PC allows the user to separate bandwidth-hungry USB devices such as printers, data recorders, or other high-speed units from lower-speed human-interface or burst-mode USB devices.

The U97-Ultra combines the functions of Hall Research models U97-H2, UU2X4, SKU-RGB and DVC-3 in a compact and easy-to-install package. The U97-Ultra was designed for high-reliability high-demand applications such as healthcare, data centre, or trading-floor installations. It includes a rack-mountable sender unit plus a standalone receiver packaged together as a kit. It is available for immediate shipment from stock.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more